At a glance
- All three share the same platform: MEMOSOFT V control, brushless induction motor, CFC-free refrigeration and a noise level below 65 dB.
- The difference is the rotor and capacity: 4, 6 or 12 blood bags per cycle.
- The DP-2065 R 12B reaches 4,000 RPM with its swinging rotors (7,500 RPM with the R6A fixed-angle rotor); the MSP-4650 R PLUS and DP-2065 R PLUS reach 3,500 RPM.
- More capacity means a larger footprint: check the access route and floor for the 12B (317 kg).
Presvac refrigerated centrifuges centrifuge double, triple and quadruple bags for component separation. This comparison helps you match capacity to demand without oversizing the installation.
Side-by-side comparison
Table:
- Feature | MSP-4650 R PLUS | DP-2065 R PLUS | DP-2065 R 12B
- Bags per cycle | 4 | 6 | 12
- Rotor | Swing-out, 4 × 1,000 mL | Swing-out, 6 × 1,000 mL | 12 bags of 500 mL
- Max. speed | 3,500 RPM | 3,500 RPM | 4,000 RPM (swinging rotors)
- W × D × H | 620 × 750 × 930 mm | 730 × 880 × 1,010 mm | 870 × 1,060 × 1,010 mm
- Weight | 147 kg | 207 kg | 317 kg
- Control | MEMOSOFT V | MEMOSOFT V | MEMOSOFT V
- Designed for | Labs, lower volumes | Medium throughput | High volume
MSP-4650 R PLUS: compact, 4 bags
Four 1,000 mL buckets on a swing-out rotor, up to 3,500 RPM and a programmable temperature from 4 °C to 40 °C. The most compact option, for moderate volumes or tight rooms.
DP-2065 R PLUS: balanced, 6 bags
Six 1,000 mL buckets, up to 3,500 RPM and 4 °C to 40 °C. The middle ground when four positions are not enough but twelve are not yet needed.
DP-2065 R 12B: high capacity, 12 bags
Up to 12 bags per cycle at up to 4,000 RPM with the swinging rotors (max. RCF 5,917 g with the R12WD). With the R6A fixed-angle rotor (6 × 1,000 mL) it reaches 7,500 RPM and 13,376 g. It concentrates more units per run and reduces repeated cycles in intensive processing.
Note
Before ordering the 12B, verify the access route, the installation surface and the electrical supply.
What all three share
- MEMOSOFT V: 50 programs, 10 ramps, control of speed, temperature, time, acceleration and braking
- Automatic record of each cycle (date, time, method, duration) with USB export
- Lid locking, imbalance detection with shutdown and emergency opening
- Brushless induction motor and CFC-free refrigeration
- Noise level below 65 dB
- Optional barcode reader for unit identification
Which model fits?
Which one fits
- MSP-4650 R PLUS Lower processing volumes and installations with limited space.
- DP-2065 R PLUS Intermediate demand, up to six bags at a time.
- DP-2065 R 12B High-volume blood banks that process up to twelve bags at a time.
Frequently asked questions
FAQ
Do all three use the same control panel?
Yes. All three use MEMOSOFT V, so protocols and operating routines are the same across the range.
Is there a model for plasma-derived products?
Yes. The DP-2065 RC PLUS is a cryo-refrigerated centrifuge for blood derivatives such as Factor VIII and fibrinogen. Ask our team for details.
Do you provide installation and training?
Yes. Presvac installs the equipment, trains the users and helps plan preventive and corrective maintenance.
